Untitled Document Untitled Document

Bromic Buying Guide

Bromic Heating is unique in being the only company to design, engineer and manufacture gas, electric and portable outdoor heating products. Below we will take you through a quick guide to help you make the right decision when selecting your new outdoor heater.


Step 1: Determining Your Dimensions and Design

The selection of the correct outdoor heater for your specific needs should be
based on key factors including:

  • The size of the space which you need to heat
  • The number of available mounting points
  • Access to a gas or electricity supply
  • Clearance heights to the ceiling and combustables
  • Your architecture, decor and design preference


Step 2: Select Your Heater(s)

Series Model Coverage Clearances Dimensions BTUs
Platinum 300 120 ft 2 A 22.05” x 15.59” x 14.85” 23,600
Platinum 500 120 ft 2 A 29.76” x 15.59” x 14.85” 39,800

A: Sides: 3.6' , To Foor: 8' , Above w/o Heat Deflector: 3'6" , Above with Heat Deflector: 1'2"


Series Model Coverage Clearances Dimensions BTUs
Tungsten 300 120 ft 2 A 19.29” x 14.09” x 14.25” 26,000
Tungsten 500 200 ft 2 A 25.43” x 14.09”x 14.25” 43,000
Tungsten Portable 180 ft 2 A 85" x 27" x 18" 39,800

A: Sides: 3.6' , To Foor: 8' , Above w/o Heat Deflector: 3'6" , Above with Heat Deflector: 1'2"


Series Model Coverage Clearances Dimensions Electical(Watts/Volts/Amps)
Platinum 2300W 65ft 2 B 33" x 7" x 2" 2300/240/10
Platinum 3400W 108ft 2 B 50.2" x 7" x 2" 2300/240/10

B: Wall: 6' , Ceiling: 8' , Side: 10" , Floor: 6' Wall Mounted, 8' Ceiling Mounted

C: Wall: 6' , Ceiling: 8' , Side: 18" , Floor: 6' Wall Mounted, 8' Ceiling Mounted


Series Model Coverage Clearances Dimensions Electical(Watts/Volts/Amps)
Tungsten 2000W 65ft 2 B 44” x 8.5” x 3.5” 2000/240/9
Tungsten 3000W 100ft 2 C 56” x 8.5” x 3.5” 3000/240/13
Tungsten 4000W 130ft 2 C 44” x 8.5” x 3.5” 4000/240/17
Tungsten 6000W 160ft 2 C 56” x 8.5” x 3.5” 6000/240/25

B: Wall: 6' , Ceiling: 8' , Side: 10" , Floor: 6' Wall Mounted, 8' Ceiling Mounted

C: Wall: 6' , Ceiling: 8' , Side: 18" , Floor: 6' Wall Mounted, 8' Ceiling Mounted


Series Model Coverage Clearances Dimensions Electical(Watts/Volts/Amps)
Cobalt 4000W 120ft 2 C 44” x 8.5” x 3.5” 4000/240/17
Cobalt 6000W 144ft 2 C 56” x 8.5” x 3.5” 6000/240/25

B: Wall: 6' , Ceiling: 8' , Side: 10" , Floor: 6' Wall Mounted, 8' Ceiling Mounted

C: Wall: 6' , Ceiling: 8' , Side: 18" , Floor: 6' Wall Mounted, 8' Ceiling Mounted

Step 3: Choose Your Controls


All Bromic Gas Heaters will include a simple On/Off control. Electric heaters do not include an On/Off Control but can be purchased at a local hardware store.

wireless controls

Wireless On/Off Controls

Available For Electric heaters. The controller allows the power output of the heater to be dimmed down for maximum comfort. Learn More

dimmer controls

Dimmer Controls

Dimmer controls are Compatibale with both gas and electric heaters.
Learn More


Step 4: Choose Your Mounting Options

All Heaters will come with proper wall brackets to successfully mount your heater the the wall.

Flush Mounted Recess Kits Heat Deflectors Ceiling Poles
Available For Tungsten
Electric Units
Recommended for Gas Heaters
to reduce clearances
For Gas Heaters that need to be mounted from
ceiling rather than the wall. Available in a variety of lengths
2000W & 4000W
Buy Here
300 Series
Buy Here
Buy Here
3000W & 6000W
Buy Here
500 Series
Buy Here

Frequently Asked Questions

Bromic heaters can be plugged into an electrical outlet and turned on using an electric switch. Please note that a licensed technician must install your Bromic heaters.

Yes - Bromic gas heaters have an electric ignition which requires an electrical supply.

No - the gas heaters are either on or off, which means the heat cannot be adjusted.

Other than our Tungsten Smart-Heat™ Gas Portable, Bromic Smart-Heat™ outdoor heaters must be installed by a licensed technician.

The performance of any outdoor heater can be affected by environmental factors such as wind. However Bromic heaters have the highest wind resistance of any outdoor heaters on the market and perform well at wind speeds up to 13mph, making them by far the best-in-class. While built from premium materials and engineered for longevity, we do recommend that our Smart-Heat™ gas, electric and portable outdoor heaters are best mounted undercover and not directly exposed to salt mist, rain or snow.

Bromic always recommends mounting under a cover for maximum life. The platinum and tungsten gas heaters are constructed using stainless steel to help ensure maximum life in the outdoor environment. Stainless Steel offers greater protection against corrosion however like all ferrous metals, it is not completely corrosion resistant. To maximize the life of your platinum heater it is therefore important that frequent cleaning is performed and appropriate care is taken.

Clean the heater weekly during regular use and at least monthly when not in use. To clean effectively, Bromic recommends the following:

  • Apply 3M™ stainless steel cleaner and polish to protect the stainless steel from corrosion (NOTE: Cleaner should not be applied on any internal heater components or any other parts which come into direct contact with flame).

Paypal and Paypal CreditWe accept VISA, MasterCard, Discover, and American Express